s M• QO•••MMv am Rd. - Savannah, Georgia 31407 Work Order Detail Repair Station: FAA CRS GR4R216M Order: SC35I348 Status: Completed Squawk: 1.20 "I N Title: HYPERION AIR, INC. Department: SC Maintenance Resolution: No Weight and Balance revisions required during this visit. Signed Off 12/4/2013 6:38:19AM By. IGGLEHART, DAVID-312188 Completed: 12/4/2013 6:38:19AM BY: IGGLEHART, DAVID-312188 Status: Completed Discrepancy: Exterior Paint and Weight & Balance Requirements. Review scope of aircraft exterior paint touch-up/repairs, and skin replacements resulting in paint reapplication, and determine affect on weight and balance. For surfaces where paint is stripped and reapplied or added on top of existing paint on an area greater than 36 square feet the thickness values will be documented before and after painting . If average thickness values remain the same, weight and balance revision is not required. Resolution: Signed Of Completed: For surfaces painted with an area greater than 36 square feet and before and after paint thickness average varies, QC review for possible weight and balance revision will be required. • Thickness will be plotted on an aircraft drawing derived from AMM chapter 6 or other suitable sketch, attached to the work order and measurements taken on a two square foot grid. • Reference CAMPS 4000, paragraph 3.5.1 for paint restrictions to flight control surfaces and RVSM certified aircraft. • Reference CAMPS 4000, total average thickness shall not exceed 6 mils. • Per CAC Mass Properties Engineering, paint thickness of 5 mils equals .055 pounds per square foot. • If after QC review, weight change is greater than 2 pounds or .05% of MAC, the weight and balance report will require recomputation. No Exterior Paint Weight and Balance revisions required during this visit. 12/4/2013 6:37:51AM IGGLEHART, DAVID-312188 12/4/2013 6:37:51AM By: IGGLEHART, DAVID-312188 Squawk: 1.21 Discrepancy: Status: Wafting appr