From: Richard Kahn To: "Jeffrey E." <[email protected]> Subject: Dock Fenders Date: Tue, 23 Jun 2015 19:44:00 +0000 Attachments: SHBRK_Scann15062315370.pdf Layout Attached are 5 layout options for dock fenders in addition to our current layout Options 1-3 are three rows of 6' fenders Carlos measured to cover entire dock we would need 693 feet which comes to 116 (6' pieces) Options 4 & 5 are two rows of 6' fenders Carlos measured to cover entire dock we would need 462 feet which comes to 77 (6' pieces) Note 500 feet is minimum order therefore we will need to order 84 pieces Carlos has sample on LSJ in dark grey color which you said was correct color If you are not satisfied with any of the above layouts please advise on alternate configuration Fender Holes Regarding Holes in Fenders i also outlined two options Option A - Screws will be 1.5 feet apart Option B - Screws will be 1 foot apart The Back Hole would be 1/2" and Front Hole will be 1.5" Timing Production will take 3 weeks and then another 1 week for shipping Projected arrival on STT is July 20 Installation Carlos said that with Ramon and Hernando installation will take approximately 1 week Projected Costs Options 1-3 (three rows of fenders) Color - Dark Grey # 11181 13.44 x 693 feet = 9,314.92 Vendor Hole Drilling (1 drilling cost per hole x 116 pieces x 3 holes) 348.00 Stainless Steel Threaded Rods & Bolts (estimated 116 pieces x 3 screws per piece x 12.00) 4,176.00 EFTA00853629