GENERAC INDUSTRIAL Date: March 31, 2016 To: Great Saint James Attn: Ann Rodriguez and Danny Vickers Reference: GSJ We are pleased to offer the following quote for the above project Quantity 1 - Generac Industrial diesel engine-driven generator set with turbocharged/aftercooled 6-cylinder 6.7L engine, consisting of the following features and accessories: • Stationary Emergency-Standby rated • Permanent Magnet Excitation • With upsized 130 kW alternator • UL2200 • EPA Certified • H-100 Control Panel o Meets NFPA 99 and 110 requirements o Temp Range -40 to 70 degrees C o Digital Microprocessor: • Two 4-line x 20 displays, full system status • 3 Phase sensing, +/-0.25% digital voltage regulation • RS232, RS485 and Canbus remote ports • Waterproof connections • All engine sensors are 4-20ma for minimal interference • Programmable I/O • Built-in PLC for special applications o Engine function monitoring and control: • Full range standby operation; programmable auto crank, Emergency Stop, Auto-Off- Manual switch • lsochronous Governor, +1-0.25% frequency regulation • Full system status on all AC output and engine function parameters • Service reminders, trending, fault history (alarm log) • 12T function for full generator protection • Selectable low-speed exercise o HTS transfer switch function monitoring and control o 2-wire start controls for any 2-wire transfer switch • Level 2 Acoustic Enclosure, Aluminum o Industrial Grey Baked-On Powder Coat Finish • Standard MLCB, 80% rated thermal-magnetic o 500 Amp • Battery Charger, 2.5 Amp, installed • 36" 693 Gallon Double-Wall UL142 Basetank o Mechanical fuel level indicator gauge o Electronic fuel level sender o Emergency Vent Remote Emergency Stop Switch, Surface-Mount, shipped loose Page 1 of 3 EFTA00589829